Archery Addix banner
1 - 9 of 9 Posts

· Registered
Joined
·
829 Posts
Discussion Starter · #1 ·
I need to shorten my draw by about a 1/4 in(27.5 to short 28 a hair to long) whats the best way to do this?? I'm not shooting a loop so I can't make that shorter........Any ideas :cool:
 

· Registered
Joined
·
153 Posts
msar said:
I need to shorten my draw by about a 1/4 in(27.5 to short 28 a hair to long) whats the best way to do this?? I'm not shooting a loop so I can't make that shorter........Any ideas :cool:
Go with the 27.5 draw and put a short loop on. Or depending on your release if it is adjustable you can shorten it up a little bit. :(
 

· Registered
Joined
·
628 Posts
scott archery makes a release called a wildcat. it puts your finger closer to the string so you can shoot possibly a 1/4 longer draw.

Bru
 

· Registered
Joined
·
829 Posts
Discussion Starter · #6 ·
Thanks gang BUT I shoot a custom made BT with a rope that a friend and his son made untill the son was taken to the Big Archery world in the sky. I'm not sure how it would work with a loop But I guess I could try it. Thanks again :(
 

· Registered
Joined
·
680 Posts
any way to change the length of the rope with a newer rope on your release? You could swtich out the ropes with a longer/shorter rope
 

· Registered
Joined
·
829 Posts
Discussion Starter · #8 ·
Working on that as we ...post ??? I was thinking of adding twists to the cable but not sure what that would do to the set up.

Thanks again Gang will let you know the out come. shoot tomarrow night. :( :grin:
 

· Registered
Joined
·
829 Posts
Discussion Starter · #9 ·
Sorry I did not get back as soon as I said But I had a small problem Wed, Was cutting some shafts for a friend when the saw blade blew up on me and left a good? cut on my bow hand OUCH!!! I did get out tonight and shorted the loop on the release and its working fine! Thanks again!! :grin:
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top