[RWP]

Will the short bar work on a 331 or should I get the long?
Thanks
RwP

 

[rutnstrut74]

Either one will work. :sad:

 

[semobow]

I have a TT on my 334 but I couldn't tell you what bar it has on it. :???:

 

[Deer30]

Either one should work. I have noticed Ross a has a little thicker riser. I have had to set my prongs close to the riser with the big prongs. I had to grind them down (prongs). I would get the smaller set of prongs it will give you more adjustment ability inward. Anthony

 

[GANDEE]

i had to put the long bar on my cardiac so the prongs wouldn't hit the riser

 

[mosouthpaw]

either one, but i went with the short. Both have two mounting screws to cover lots of range of adjustment.

TT are grrrreat rests.

 

[Twolf]

yep, either one will work out just fine. I have the long bar on my 331 and it's sticking out a little bit but doesn't do anything to effect anything. My bud has the short bar on his 331 and it been nothing but great for him. The adjustments on the TT rests are great and you shouldn't have a problem with either one.

 

[Huntinthearmpit]

I use the short bar on my 331. I have the Shakey launcher and it just touches the inside radius of the riser at rest. I'm not crazy about it but I would rather have that than pull the rest back and then you have to deal with torquing the bow like using an overdraw.

 

[Deer30]

I use the short bar on my 331. I have the Shakey launcher and it just touches the inside radius of the riser at rest. I'm not crazy about it but I would rather have that than pull the rest back and then you have to deal with torquing the bow like using an overdraw.

Mine is in the same place. Barely touching where the shelf and the riser come together.