Archery Addix banner
1 - 7 of 7 Posts

·
Registered
Joined
·
499 Posts
Discussion Starter · #1 ·
Hey everyone,
What arrows do you recommend for my Ross? I am shooting a 29 inch draw length and a 67 lb draw weight.
Right now I am shooting 29.5 inch Beman ICS Hunter 340s, but I feel these maybe underspined.
What spine and shafts do you think I should be shooting? Thanks.
 

·
Registered
Joined
·
490 Posts
I am shooting A/C SuperSlims off of my 334 ~ 28 1/2 draw and 71#'s. They are 400's, and they fly great. I would think that 340's would be overspined.
 

·
Registered
Joined
·
628 Posts
i shoot 29 inch draw with a W/B and my arrows are 27 3/4. are you shooting a fall away?

you should be able to shoot 400 spine with a shorter arrow. they should still work with your length with 400's

BRU
 

·
Registered
Joined
·
499 Posts
Discussion Starter · #4 ·
7bru said:
i shoot 29 inch draw with a W/B and my arrows are 27 3/4. are you shooting a fall away?

you should be able to shoot 400 spine with a shorter arrow. they should still work with your length with 400's

BRU
Yes I am shooting a Trophy Taker. Do you really think I could get away with 400s? The Easton charts recommend 340s at 67 lbs and 300s at 68 lbs. Thanks for the input.
 

·
Registered
Joined
·
628 Posts
well i guess you should do what the chart says.

I just can't figure out how we are shooting the same DL and are way different on arrow length. another thing is point weight?

How far past the prongs are your arrows at full draw.

seams to me if you could get down to 28 inches you would be fine with 400's

BRU
 

·
Registered
Joined
·
499 Posts
Discussion Starter · #6 ·
7bru said:
well i guess you should do what the chart says.

I just can't figure out how we are shooting the same DL and are way different on arrow length. another thing is point weight?

How far past the prongs are your arrows at full draw.

seams to me if you could get down to 28 inches you would be fine with 400's

BRU
I will measure my arrows again tonight and take a picture of one at full draw. Thanks.
 

·
Registered
Joined
·
490 Posts
This is kind of related ~ the arrows I shoot off of my 331 are 26 1/2 long. They just go past the launcher of the rest
( QAD ). They are Maxima 350's w/ 125 gr tip. The draw on the 331 is 29". Its about 1/2 long, but it fits me OK.
If you can experiment with different lengths and tip weights. Thats what i did. With this set-up, 100gr tips give me an overspined tear, but with 125's I get a good tear.
 
1 - 7 of 7 Posts
Top